Products / Host Cards / PCIe x8 / ePCIe(iPass x4) & Internal PCIe 4-lane(IOI 19pin)

E&IP4X-PCIE8XG201

External PCIe x4 & Internal PCIe x4 (Dual x2) to PCIe x8 Gen 2 Switch Host Card

Specifications

Downloads

Introduction

E&IP4X-PCIE8XG201 is External PCIe x4 & Internal PCIe x4 (Dual x2) to PCIe x8 Gen 2 Switch Host Card.
The flexible hardware configuration allows the switch to be tailored for the following configuration options:

Technical Specifications

Upstream PCIe interface	8-lane PCI Express PCIe Gen 1 (2.5GT/s) PCIe Gen 2 (5.0GT/s)
Downstream PCIe interface	One 38pin iPass™ (0.8mm pitch) compatible I/O Connector Scalability up to 10Gb/s PCIe Gen I – 2.5Gb/s PCIe Gen II – 5.0Gb/s Durability - 250 cycles Fully shielded to provide maximum EMI/RFI protection Guide to system bezel gasket Cable plug gasket to front face of Guide First mate, last break RoHS compliant Two IOI Proprietary Dual-lane Internal PCIe Ports (PCIe-1~2) 10X2_19pin Header (Pitch=2.0mm) 2-lane PCIe Each Dual-lane Internal PCIe Port PCIe Gen 1 (2.5GT/s) PCIe Gen 2 (5.0GT/s)
Key Features	Standards Compliant PCI Express Base Specification r2.0 (Backwards compatible with PCIe r1.0a/1.1) PCI Power Management Spec r1.2 Microsoft Vista Compliant Supports Access Control Services Dynamic link-width control Dynamic SerDes Speed Control High Performance Non-blocking internal architecture Full line rate on all ports Cut-Thru latency: 140ns Maximum Payload Size - 2,048 bytes Read Pacing (intelligent bandwidth allocation) Dual Cast Dynamic Buffer Pool Architecture for faster credit updates PCI Express Power Management Link power management states: L0, L0s, L1, L2/L3 Ready, and L3 (with Vaux *not supported*) Device power management states: D0 and D3hot Active State Power Management (ASPM) Quality of Service (QoS) Two Virtual Channels (VC) per port Eight Traffic Classes per port Weighted Round-Robin Port & VC Arbitration
Lane Status LEDs Blink: Gen 1 speed Solid: Gen 2 speed	Upstream Lane Status LEDs ULED1: Upstream x1 Status LED ULED4: Upstream x4 Status LED ULED8: Upstream x8 Status LED Downstream Lane Status LEDs J1LEDL8: Downstream Lane 8 Status LED J1LEDL9: Downstream Lane 9 Status LED J1LEDL10: Downstream Lane 10 Status LED J1LEDL11: Downstream Lane 11 Status LED PCIe-1L12: Downstream Lane 12 Status LED PCIe-1L13: Downstream Lane 13 Status LED PCIe-2L14: Downstream Lane 14 Status LED PCIe-2L15: Downstream Lane 15 Status LED
Jumper JP3 (PCIe Port Configuration)	Pin1-2 x8, x4, x1, x1, x1, x1 Pin2-3 x8, x4, x4
Switch	Non-Transparent Mode ON: Enable OFF: Disable (default) Select Upstream NT Port ON: Port 1 (default) OFF: Port 3 Link Upconfigure Timer enable (For Gen 1 devices that do not ignore the Gen 2 Upconfigure bits during the Link Training sequence) ON: Enable OFF: Disable (default) PCIe Lane Config ON: PCIe Gen1 (2.5Gb/s) OFF: PCIe Gen2 (5Gb/s) (default)
Computer Platform Requirements	Desktop computer equipped with a PCIe 1.0/2.0 x8, x16 slot

Computer Platform

Computer with PCI Express slot ( x8, x16)

Note:
For the best performance (5.0 Gbps), It should be installed in a PCIe Gen 2 compliant slot in the host computer. Most computers have PCIe Gen 2 (5.0 Gbps) throughput on x8 or x16 slots.
A PCIe Gen 1 compliant slot reaches up to 2.5 Gbps throughput

Physical Dimensions