U31X2-PCIE4XG321

Dual Channel 4-port (2-port x 2) USB 3.2 Gen 2 to PCI Express x4 Host Card

Specifications

Downloads

Highlights

Host Bus: PCIe x4 Gen 3 (32Gbps)
- Compliant with PCI Express Base Specification Revision 3.0
Dual independent USB 3.2 Host Controllers (Asmedia ASM3142, USB IF TID 5080000010)
- Compliant with Universal Serial Bus 3.2 Specification Revision 1.0
- Compliant with Intel’s eXtensible Host Controller Interface (xHCI) specification Revision 1.1
Four USB 3 Cable Ports (Type-C Receptacle, USB IF TID 5200000315)
- Provides USB 3.x cable port lock mechanism

Introduction

The U31X2-PCIE4XG321 is a Dual Channel 4-port (Type-C) USB 3.2 Gen 2 (10Gbps) to PCI Express x4 Gen 3 Host Adapter.

U31X2-PCIE4XG321 is designed with Two key components.

12-Lane, 5-Port PCI Express Gen 3 Switch.
PCI Express to USB 3.2 Single Chip Host Controller (Asmedia ASM3142, USB IF TID 5080000010)

Utilizing the standard PCI Express Switch, the 12-Lane/5-Port PCI Express Switch provides the most efficient fan-out solution for integrating four PCI Express to USB 3.2 Gen 2 Single Chip Host controllers into a small board design. Each USB 3.2 to PCI Express Single Chip Host controller takes advantages of 10 Gbps burst rate of 4-lane PCI Express bus in both directions and is fully compliant with PCI Express Base specification r3.0. This solution provides full PCI Express and USB 3.2 functionality and performance.

Technical Specifications

Primary PCI Express	Standards compliant PCI Express Base Specification r3.0 (compatible with PCIe r1.0a/1.1 & 2.0) PCI Power Management Spec r1.2 Microsoft Windows Logo Compliant Supports Access Control Services Dynamic Link-width control Dynamic SerDes speed control High Performance Non-Blocking switch fabric Full line rate on all Ports Cut-Thru with 154ns max packet latency 2KB max payload size PCI Express Power Management Link power management states: L0, L0s, L1, L2/L3 Ready, and L3 Device states: D0 and D3hot Quality of Service (QoS) support Traffic Class Queuing Eight Traffic Classes per Port Weighted Round-Robin source port arbitration
Secondary PCI Express	Support PCI Express Gen2x2 or Gen3x1 Up to 10Gbps bandwidth performance with low latency Support PCI Express Link power management Compliant with PCI Express Base 3.0 Specification Compliant with PCI Express card Electromechanical 2.0 specification Compliant with PCI Express Mini Card Electromechanical 1.2 specification Compliant with Express Card Standard Revision 2.0 Compliant with PCI Bus Power Management Interface Specification Revision 1.2 Compliant with PCI Local Bus Specification Revision 3.0 Support overclocking capability on PCI Express interface
USB Features	One Channel support two ports of USB 3.2 Up to USB 3.2 Gen 2I 10Gbps Compliant with Universal Serial Bus 3.2 Specification Revision 1.0 Compliant with Universal Serial Bus Specification Revision 2.0 Compliant with USB Attached SCSI Protocol Revision 1.0 Support Multiple INs function Support USB 3.2 and USB 2.0 Link Power Management Support Control, Bulk, Stream, Interrupt, Isochronous transfer type Support independent port power control Support overcurrent detection Integrate Spread Spectrum Controller for USB 3.2 interface Backward compatible with Legacy USB function and device Support the Debugport
USB Data Transfer Rate	USB 3.2 Gen 2 (10G), USB 3.2 Gen 1 (5G), USB 2.0 (480MB)
Number of Ports	Four independent USB 3 Cable Ports (Type-C Receptacle)
USB Bus Power Input	USB bus power may from the following source (A or B): A. From PCIe 12V (Step-Down) B. From Power Connector (IDE 4-pin or SATA 15-pin)

Computer Platform

Computer with PCI Express slot ( x4, x8, x16)

Note:
For the best performance, It should be installed in a PCIe Gen 3 compliant slot in the host computer.

Operating System Requirements

Inbox driver for Windows 8 later, Linux (kernel 3.x.x later)
Supporting the proprietary driver for
- Windows 7
- Windows server 2003
- Windows server 2008
- Windows server 2012

Physical Dimensions

110mm(W) x 98mm[120mm](H)
NW: g