Products / Bridge Boards / USB 3.2 Gen 1 (USB 3.0) / to SATA

U3-SATA214

USB 3.0 to SATA II (3Gb/s) Bridge Board

Specifications

Downloads

Highlights

Direct Connect to SATA Drive
Supports both HDD and ODD
DC Power Input: Big IDE 4-pin DC Power Connector

Introduction

U3-SATA214 is an USB 3.0 to SATA II bridge board. It has an USB 3.0 SuperSpeed device port and a SATA 1.5Gbps/3Gbps host port. The high performance USB 3.0 interface can connect to any super speed/ high speed or full speed USB host or USB hub and can instantly be detected as a USB mass storage device.

Technical Specifications

USB to SATA Bridge Board: ASMedia ASM1153 (TID# 340870005)

Support Spread Spectrum Control of USB3.0 and SATA interface to improve the EMI performance
Compliant with USB3.0 Specification Revision 1.0
Compliant with USB Specification Revision 2.0
Supports USB Super-Speed/High-Speed/Full-Speed Operation
Supports USB Mass Storage Class, Bulk-Only Transport Specification Revision 1.3
Complies with Serial ATA Specification Revision 2.6
Serial ATA bus up to 3Gbps Signal bandwidth
Support SATA Hot-Plug
Support ATA/ATAPI Packet Command Set
Support ATA/ATAPI LBA48 addressing mode
Integrated 8-bit micro-processor with embedded program RAM and ROM
Support SPI NVRAM for Vender Specific Application of USB Device Controller
Provides pin header for Power and SATA Activity Indicator LEDs
Self Powered Mode Operation
DC Power Input:
- Big IDE 4-pin DC Power Connector

Physical Dimensions

6.40cm x 3.65cm x 2.83cm
Direct Connect Vertical type
U3-SATA214, NW:17.5g

Available Models

U3-SATA214	U3-SATA214C w/Plastic case

Hardware Requirements

Desktop PC: with either a built-in USB (1.0 or 2.0 or 3.0 ) controller or an USB (1.0 or 2.0 or 3.0 ) to PCI Host Adapter equipped with an external USB port.
Laptop PC: with either a built-in USB (1.0 or 2.0 or 3.0 ) controller or an USB (1.0 or 2.0 or 3.0 ) to CardBus PC Card equipped with an external USB port.

Kit includes

U3-SATA214 Bridge Board