Products / Network Solution / NIC (Network Interface Card) / 10/100/1000M Ethernet (POE)
Phased out

GEP-PCIE1XG101

10/100/1000M Ethernet (POE+) to PCI Express x1 Host Card

GEP-PCIE1XG101|10/100/1000M Ethernet (POE+) to PCI Express x1 Host Card
Highlights
  • Supports PCI Express Specification Revision 1.1
  • Single (x1) PCI Express Lane, Low-Profile Form Factor
  • 10/100/1000M Gigabit Ethernet (POE+) ports
    • Support IEEE 802.3at for PoE+ (Power over Ethernet Plus)
    • Power Sourcing Equipment (PSE) design, provides data and up to 30W of power on ethernet port
  • Supports jumbo frame to 9K bytes
Introduction

The GEP-PCIE1XG101 is 1-port 10/100/1000M Ethernet (POE+) to PCI Express x1 Host Card.

The 10/100/1000M Ethernet controller supports the PCI Express 1.1 bus interface for host communications with power management, and is compliant with the IEEE 802.3u specification for 10/100Mbps Ethernet and the IEEE 802.3ab specification for 1000Mbps Ethernet.

The 10/100/1000M Ethernet controller is fully compliant with Microsoft NDIS5, NDIS6 (IPv4, IPv6, TCP, UDP) Checksum and Segmentation Task-offload (Large send and Giant send) features, and supports IEEE 802 IP Layer 2 priority encoding and IEEE 802.1Q Virtual bridged Local Area Network (VLAN). The above features contribute to lowering CPU utilization, especially benefiting performance when in operation on a network server.
Technical Specifications
Ethernet Feature
  • Integrated 10/100/1000M transceiver
  • Auto-Negotiation with Next Page capability
  • Supports PCI Express 1.1
  • Supports pair swap/polarity/skew correction
  • Crossover Detection & Auto-Correction
  • Wake-on-LAN and remote wake-up support
  • Microsoft NDIS5, NDIS6 Checksum Offload (IPv4, IPv6, TCP, UDP) and Segmentation Task-offload (Large send v1 and Large send v2) support
  • Supports Full Duplex flow control (IEEE 802.3x)
  • Supports jumbo frame to 9K bytes
  • Fully compliant with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
  • Supports IEEE 802.1P Layer 2 Priority Encoding
  • Supports IEEE 802.1Q VLAN tagging
  • Supports IEEE 802.3az-2010 (EEE)
  • Supports power down/link down power saving
  • Supports PCI MSI (Message Signaled Interrupt) and MSI-X
  • Supports quad core Receive-Side Scaling (RSS)
  • Supports Alert Standard Format 2.0 (ASF2.0)
  • Supports Protocol Offload (ARP & NS)
  • Supports Customized LEDs
  • Supports 1-Lane 2.5Gbps PCI Express Bus
  • Supports hardware ECC (Error Correction Code) function
  • Supports hardware CRC (Cyclic Redundancy Check) function
POE+ Feature
  • Supports IEEE 802.3at Power Sourcing Equipment (PSE)
  • Operates from a 54 V supply
  • Provides PD real-time protection through the following mechanisms: overload, under-load, over-voltage, over-temperature, and short-circuit.
  • Auto mode – allows turning PDs on and off automatically.

Power Input for POE

Step-Up 12V from either PCIe Slot or auxiliary SATA power connector

  • From PCIe Slot
    • 25 W Slot (Max. 25W)
    • 75 W Slot (Max. 30W)
  • From SATA Power Connector
    • SATA Power (Max. 30 W)
LED Indicators
  • Power LED
    • On: Port Power On (normal operation)
    • 0.4Hz Blink: Power Management event
    • 0.8Hz Blink: Port Over Load / Port Short Circuit / Port failed at Startup
    • 3.3Hz Blink: Vmain_Out of Range or Over Temp
    • Off: Port Off
  • Link Status LED
Number of Port:
  • 10/100/1000M Gigabit Ethernet (POE+) port
    • 1000 BASE-T Single-Port Magnetics/RJ-45 with POE
Computer Platform
  • Computer with PCI Express slot ( x1, x4, x8, x16)
Operating System Requirements
  • Windows XP/ Vista/ 7/ 8/ 10
  • Linux kernel 3.x /2.6.x/ 2.4.x
Certifications
  • CE Test: Pass
  • FCC Test : Pass
  • VCCI Test: Pass
  • RCM Test: Pass
Physical Dimensions
  • 64mm(H) x 118mm(L)
  • NW: 73.5g
Kit includes
  • GEP-PCIE1XG101
  • Driver CD
Optional Accessories
  • Low Profile PCI Bracket (BR-00194-30-1020)
Drivers
Version: 1.12.0037 Date: 2017/12/6
Content: IOI Drivers for Windows XP/Vista/7/8.1/10 Download