Products / M.2 PCIe NVMe SSD Solution / Bridge Boards / USB 3.1 Gen 2 to M.2 NVMe

New

DU31-NVMe01

Dual USB 3.1 Gen 2 (10Gbps) to M.2 NVMe Bridge Board with Write Protection (Read-Olny)

Specifications

Downloads

Highlights

Two USB 3.1 Gen 2 to PCI Express NVMe SSD Bridges
- Support up to USB 3.1 Gen2 (10Gbps)
- Support BOT and UAS Protocol
- Support up to PCI Express Gen3 x2
- Support PCI Express NVMe SSD without driver
Two Type-C Connectors (Type-C Receptacle, USB IF TID 5200000033)
Two M.2 (Socket 3 Key M PCIe-based SSD Module Pinout)
DC Power Input: Walkman-type 2.0 mm DC Jack
Provides Jumper for Write Protection (Read-only) or Read / Write selection

Introduction

DU31-NVMe01 integrated two USB 3.1 Gen 2 (10Gbps) to PCIe Gen3 x2 NVMe device bridges into one Board. The DU31-NVMe01 provides two M.2 (Socket 3 Key M PCIe-based SSD Module Pinout) in connection to Two USB 3.1 Type-C ports . For all those without M.2 (Socket 3 Key M PCIe-based SSD Module Pinout) on their computers, this is an useful solution for installing all types of M.2 NVMe (PCIe-based) SSD Modules.

DU31-NVMe01 provides a Jumper which allow user to set the function for selecting Write Protection (Read-only) or Read / Write.

Technical Specifications

USB Feature	Support up to USB 3.1 Gen2 Support BOT and UAS Protocol Support USB link power management Support USB Hot Plug Support Spread Spectrum Clock Control Support unmap command set Support ATA passthrough command set Support vender specific command set Compliant with Universal Serial Bus 3.1 Revision 1.0 Compliant with USB Type-C spec Release 1.3
PCI Express Feature	Support up to PCI Express Gen3 x2 Support PCI Express NVMe SSD without driver Support Spread Spectrum Clock Control Support PCI Express link power management Compliant with PCI Express base spec Revision 3.1a Compliant with PCIe M.2 Revision 1.0
NVM Express Feature	Support NVMe power management Support NVMe: SCSI Translation Reference Revision 1.5 Support Trim command set Support NVMe Error Reporting & Recovery S.M.A.R.T drive monitoring Compliant with NVMe Revision 1.3c
Upstream Host Connector	Two Type-C Connectors (Type-C Receptacle, USB IF TID 5200000033)
Downstream Internal PCIe Bus Interface	Two M.2 (Socket 3 Key M PCIe-based SSD Module Pinout) Supports M.2 NVMe SSD Module Module card Types: Type 2242: 42mm(L) x 22mm(W) Type 2260: 60mm(L) x 22mm(W) Type 2280: 80mm(L) x 22mm(W) Type 22110: 110mm(L) x 22mm(W)
Jumper	Write Protection Setting Header: CON1 WP, CON2 WP Short: Write Protection (Read-only) Open: Read / Write
LEDs	3V3 Power Indicator LED (3.15V~3.45V) DAS (Drive activity Signal) LED: CON1 DAS LED, CON2 DAS LED Write Protection LED: CON1 WP LED, CON2 WP LED
Power	DC Power input Connector: Walkman-type 2.0 mm DC Jack Power Input Range: DC 9 ~ 24V ( max. 5.0A)
Power Switch	Power ON/OFF +12V
Dimensions	161(W) x 127(D) mm NW: 97.3g